Serving the Las Cruces area  ·  (575) 339-1859  ·  Open Mon-Sun 7am-7pm
📞 (575) 339-1859 Free Quote

Metal Roofing in Chaparral, NM (88081) · Local Professionals

Las Cruces Metal Roofing · Fast response in Chaparral and the Las Cruces area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+272Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Chaparral sits on the mesa east of Las Cruces, where the desert sun hits hard and the wind never really stops. Most homes here are stucco ranches and manufactured houses on good-sized lots, many built between the 1980s and 2000s, and a lot of them are still carrying the original shingle roof. If you live off Chaparral Boulevard or near the Rio Grande Elementary area, you already know what a few summers of UV does to asphalt shingles: they curl, crack, and start shedding granules into your gutters.

That's why folks in Chaparral (88081) call us. We're Las Cruces Metal Roofing, based just down the road, and we've seen how the intense sun and monsoon hail treat roofs out here. Whether you're near the Chaparral County Park or out on a larger lot toward the mesa, we can tell you straight whether a repair will hold or if it's time for a metal roof that can take the abuse.

Metal Roofing in Chaparral (88081)

Chaparral is mesa country, and that changes how we work. Lots are often a half acre or more, with caliche just under the surface, so we plan for anchors and staging that won't fight the ground. The wind out here is no joke: it comes across the open desert and finds every loose fastener or lifted panel edge. We use screws and closures rated for high wind, and we pay extra attention to the perimeter and ridge, where wind uplift starts. Summer monsoon storms can drop hail and push water hard against flashing, so we seal penetrations and check every seam. And because the sun bakes roofs year-round, we recommend lighter colors and coatings that reflect UV instead of absorbing it.

Our team has worked on everything from small casitas to commercial shops along Highway 213, and we know the local building department's habits. We're a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we've been serving Chaparral and the surrounding Las Cruces area long enough to know which roof profiles and colors hold up best in this climate.

Our services in Chaparral

How a Job Works in Chaparral

Step 1: You call us at (575) 339-1859 or send a message, and we set up a free on-site assessment. We'll walk your roof, check the decking, flashing, and fasteners, and talk through your options: repair, retrofit over shingles, or a full replacement. You get a written estimate with no pressure.

Step 2: Once you approve, we pull the required permits (we'll point you to the Doña Ana County website for verification) and schedule the work. In Chaparral, access is usually easy, but we plan for wind and heat: crews start early, and we secure materials so a gust doesn't turn a panel into a sail. If you're in an HOA, we help you get the color and profile approved before we order.

Step 3: When we're done, we clean up thoroughly. We magnet-sweep for screws and nails, haul away old materials, and walk the roof with you to show you the finished job and explain any maintenance. We leave your property clean and your roof ready for the next monsoon.

Pricing in Chaparral depends on the size and pitch of your roof, how many layers are already there, and whether we're repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, screw replacement and re-fastening at $750, and coatings at $2.50 per square foot. Flashing and skylight repairs start at $600, and gutters run about $9 per linear foot. The biggest cost factors are square footage, access, the condition of the decking, and urgency after a storm. Call (575) 339-1859 for a free estimate tailored to your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Chaparral and nearby areas.

My shingles are curling and losing granules from the sun. Is a metal roof over shingles a good option in Chaparral?
Yes, a retrofit over existing shingles is often a smart choice here, as long as your roof has only one layer and the decking is sound. It saves on tear-off costs and landfill fees, and it adds a layer of insulation. We'll inspect your roof and tell you honestly if a retrofit makes sense or if a full tear-off is safer.
A monsoon storm just lifted some panels on my roof near Chaparral Boulevard. Can you come out quickly?
We prioritize storm damage calls. Call (575) 339-1859 and we'll schedule a free inspection, usually within a day or two depending on demand. We can tarp or secure the area to prevent further water damage and give you a written repair estimate on the spot.
What does a typical metal roof repair cost in Chaparral?
Most repairs start around $450 for minor leak fixes or flashing repairs. Screw replacement and re-fastening starts at $750. The final cost depends on the size of the repair, roof pitch, and whether we find hidden damage. We give you a firm quote before any work begins.
Do I need a permit for a metal roof in Chaparral?
Roofing permits are commonly required for replacements and re-roofs, and requirements vary by jurisdiction. We recommend checking with the Doña Ana County website or calling the building department to confirm what applies to your address. We handle the permit application as part of our service and make sure the work meets local code.
My neighbor says my new metal roof will change the look of the neighborhood. Do I need HOA approval?
If you're in an HOA, yes, you'll likely need approval for the panel profile and color. We can provide product samples and documentation to help with your submittal. For property lines, we respect setbacks and coordinate with neighbors if staging or access is needed. We're happy to walk you through the process.
Are you insured for work on my Chaparral property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before we start. That protects you and your property in case of an accident on the job.
How often should I inspect my metal roof in Chaparral?
We recommend a quick inspection every spring before monsoon season and after any major hail or wind event. Check for loose screws, lifted panels, and debris buildup in valleys and gutters. A professional inspection every couple of years can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Las Cruces

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Las Cruces

All your work handled by qualified professionals in Las Cruces

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

272+ Verified Client Reviews in Las Cruces

⭐⭐⭐⭐⭐ 4.9/5 · 272 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Las Cruces · Response within 24h · No commitment · ☎ (575) 339-1859

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Las Cruces ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm