Serving the Las Cruces area  ·  (575) 339-1859  ·  Open Mon-Sun 7am-7pm
📞 (575) 339-1859 Free Quote

Metal Roofing in Sunland Park, NM (88063) · Local Professionals

Las Cruces Metal Roofing · Fast response in Sunland Park and the Las Cruces area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+272Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sunland Park sits right on the New Mexico-Texas line, where the Chihuahuan Desert meets the Rio Grande and the Franklin Mountains rise to the east. The housing stock here is a mix of older adobe and stucco homes near the racetrack and Anapra Road, plus newer subdivisions off McNutt Road and Country Club Road. The intense sun, spring winds, and monsoon storms take a toll on every roof in 88063.

Homeowners in Sunland Park call Las Cruces Metal Roofing because we understand the local failure modes: cracked washers on fasteners after years of daily temperature swings, dried-out sealants around flashing, and wind-lifted panels after a microburst. We are based in Las Cruces and serve Sunland Park as part of our regular service area, so we know the streets, the permits, and the weather patterns that matter here.

Metal Roofing in Sunland Park (88063)

Sunland Park properties range from small ranches on generous lots near the Santa Teresa port of entry to tighter parcels in older neighborhoods where alleys and carports limit access. The ground is often caliche and sand, which affects how we stage materials and anchor ladders. Drainage matters too: summer monsoon rains can sheet off the arroyos and flat-roofed additions, so we check grade and downspout discharge before recommending a panel layout. Many homes here have evaporative coolers and satellite dishes that need to be remounted, and we plan for those details in the estimate.

Our team has worked on metal roofs across Doña Ana County, from standing seam on newer stucco homes to corrugated panels on agricultural sheds. We are a Metal Roofing Alliance member and fully insured, with general liability and workers' compensation coverage. That matters when crews are on your roof and when you file an insurance claim after a storm.

Our services in Sunland Park

How a Job Works in Sunland Park

Step 1: You call (575) 339-1859 or request a free estimate online. We schedule an on-site assessment, inspect the existing roof, check flashing and fasteners, and measure the roof and access points. You get a written scope and a clear price before any work begins.

Step 2: We pull the required roofing permit through the local building department and coordinate any HOA design review if your neighborhood has one. On the work day, our crew protects landscaping and vehicles, removes or retrofits the old roof, and installs the new metal system. For tight lots off McNutt Road or near the racetrack, we plan material drops and dumpster placement in advance.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We leave your property clean and show you how the new roof and flashing should perform. If you need documentation for an insurance claim, we provide photos and a written report.

Pricing in Sunland Park depends on roof size, pitch, access, and the condition of the existing deck and flashing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, while corrugated and ribbed panel roofing starts at $5.50 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters start at $9 per linear foot. We give free estimates and explain the cost factors specific to your property, so call (575) 339-1859 to schedule.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sunland Park and nearby areas.

Do metal roofs hold up to the wind and dust storms in Sunland Park?
Yes, when installed correctly. Spring winds and monsoon microbursts can lift poorly fastened panels, so we use the right fasteners and spacing for your exposure. We also check that panels are rated for the local wind zone and that seams and edges are secured. Homes near the open desert west of McNutt Road see stronger sustained winds, and we account for that in the attachment plan.
How fast can you respond to storm damage in Sunland Park?
We offer free inspections and prioritize active leaks and wind damage. Call (575) 339-1859 and we will schedule the earliest available visit, often within a day or two depending on storm volume. We can tarp or make temporary repairs to prevent further water intrusion while you wait for permanent work or an insurance decision.
What does a typical metal roof replacement cost in Sunland Park?
Most full replacements fall in the range of $9 to $12 per square foot installed, depending on panel type, roof complexity, and whether we remove the old roof or retrofit. A 1,500 square foot roof might land between $13,500 and $18,000. Repairs start at $450. We provide a written estimate after inspecting your roof and explaining the specific cost drivers.
Do I need a permit for a metal roof in Sunland Park?
Roofing permits are commonly required for full replacements and re-roofs, and requirements vary by jurisdiction. We recommend checking with the City of Sunland Park or Doña Ana County before work begins, and you can start at the official city website at https://www.donaanacounty.org. We handle permit applications as part of our service and schedule inspections as required.
What if my HOA or a neighbor has concerns about my new metal roof?
Some neighborhoods have design review rules that restrict panel profile or color. We can provide product samples and specifications for HOA approval before ordering materials. For property line concerns, we respect setbacks and coordinate with you if a neighbor's structure or tree affects access. Clear communication up front avoids delays.
Are you insured for work at my Sunland Park home?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We can provide a certificate of insurance on request. This protects you if a worker is injured on your property or if accidental damage occurs during the project.
How often should I inspect my metal roof in Sunland Park?
We recommend an inspection every two to three years, and after any major hail or wind event. The big issues here are cracked washers and dried sealant around flashing, which can lead to leaks if ignored. A quick inspection and screw replacement now can prevent a bigger repair later. Call (575) 339-1859 to schedule a free estimate.
Why choose us?

Trusted professionals in Las Cruces

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Las Cruces

All your work handled by qualified professionals in Las Cruces

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

272+ Verified Client Reviews in Las Cruces

⭐⭐⭐⭐⭐ 4.9/5 · 272 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Las Cruces · Response within 24h · No commitment · ☎ (575) 339-1859

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Las Cruces ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm