Serving the Las Cruces area  ·  (575) 339-1859  ·  Open Mon-Sun 7am-7pm
📞 (575) 339-1859 Free Quote

Metal Roofing in Radium Springs, NM (88054) · Local Professionals

Las Cruces Metal Roofing · Fast response in Radium Springs and the Las Cruces area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+272Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Radium Springs is a small, unincorporated community along the Rio Grande, just north of Las Cruces, where wide lots, dirt roads, and a mix of ranch homes and farm buildings sit under the Organ Mountains. If you live out here, you know the sun beats down year-round and the summer monsoon can send hail and wind that test any roof.

That's why homeowners in Radium Springs (88054) call Las Cruces Metal Roofing. We understand the local conditions, from the intense UV to the dust storms, and we've helped neighbors near the Radium Springs Golf Course and along Fort Selden Road protect their homes with metal roofing that lasts.

Metal Roofing in Radium Springs (88054)

Properties in Radium Springs tend to be larger and more spread out than in the city, with a mix of site-built homes, manufactured houses, and agricultural buildings. The terrain is flat to gently sloping near the river, but some homes sit on slightly elevated lots with views of the valley. That means wind exposure can be significant, and drainage patterns matter, especially during monsoon season when heavy rain can pool quickly. Many roofs here are older, and we often find failing fasteners, loose panels, or worn sealants that let water in. We also see a lot of corrugated and ribbed panel roofs on barns and sheds, which we can repair or replace with more durable standing seam if you want an upgrade.

Our team has worked throughout Doña Ana County, including Radium Springs, and we know the local building department requirements. We're fully insured and a Metal Roofing Alliance member, so you can trust the work is done right.

Our services in Radium Springs

How a Job Works in Radium Springs

Step 1: Call us at (575) 339-1859 or request a free estimate online. We'll schedule a time to come out to your property in Radium Springs, inspect your current roof, and discuss your options. We'll check for leaks, storm damage, and the overall condition of the roof, and we'll provide a written estimate with clear pricing.

Step 2: Once you approve the estimate, we'll pull any necessary permits. In Radium Springs, permitting goes through Doña Ana County, and requirements can vary, so we'll handle the paperwork and make sure everything is in order. Our crew will then install your new metal roof, repair your existing one, or replace it as needed. We work efficiently and keep the site as clean as possible, especially on rural lots where access might be a little tighter.

Step 3: After the work is done, we'll do a thorough cleanup, haul away all debris, and walk through the finished job with you. We want you to be completely satisfied with the result and understand how to care for your new roof.

Pricing for metal roofing in Radium Springs depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. We also offer coatings, flashing repair, and gutters. For a precise quote, call us at (575) 339-1859 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Radium Springs and nearby areas.

My house is near the Radium Springs Golf Course and gets full afternoon sun. What metal roof is best for that kind of exposure?
For full sun exposure, we often recommend standing seam metal roofing with a reflective finish. It handles UV and heat well, and the hidden fasteners reduce the chance of leaks. We can also apply a cool roof coating to an existing metal roof to lower attic temperatures.
A monsoon storm just blew some panels loose on my barn. Can you come out quickly to repair it?
Yes, we handle storm and wind damage repair in Radium Springs. Call us at (575) 339-1859, and we'll schedule an inspection as soon as possible. We can secure loose panels, replace damaged ones, and check for any water intrusion.
What's the typical cost to replace a metal roof on a 1,500 square foot home in Radium Springs?
For a 1,500 square foot home, a basic metal roof replacement might range from $13,500 to $18,000, depending on the material and roof complexity. Standing seam would be higher. We provide free estimates so you can get an accurate number for your specific roof.
Do I need a permit for a metal roof replacement in Radium Springs, and where do I get it?
Yes, a permit is typically required for a full roof replacement. In Radium Springs, permits are issued by Doña Ana County. You can check the City of Radium Springs website at https://www.donaanacounty.org for general information, but we recommend contacting the county building department directly to confirm requirements. We can handle the permitting process for you.
My neighbor's tree branches hang over my roof. What are my rights if I need to trim them for roof work?
In New Mexico, you generally have the right to trim branches that overhang your property line, but it's best to talk to your neighbor first. If a branch falls and damages your roof, your insurance may cover it. We can advise on protecting your roof during trimming and coordinate with your neighbor if needed.
Are you insured for roofing work on my property in Radium Springs?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request. This protects you and our crew in case of any accidents on the job.
What should I do to maintain my metal roof in Radium Springs between monsoon seasons?
We recommend an annual inspection, especially before monsoon season starts in July. Check for loose fasteners, debris in gutters, and any signs of rust or damage. We offer maintenance plans and can perform a free inspection to catch small issues before they become big problems.
Why choose us?

Trusted professionals in Las Cruces

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Las Cruces

All your work handled by qualified professionals in Las Cruces

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

272+ Verified Client Reviews in Las Cruces

⭐⭐⭐⭐⭐ 4.9/5 · 272 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Las Cruces · Response within 24h · No commitment · ☎ (575) 339-1859

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Las Cruces ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm