Serving the Las Cruces area  ·  (575) 339-1859  ·  Open Mon-Sun 7am-7pm
📞 (575) 339-1859 Free Quote

Metal Roofing in Hatch, NM (87937) · Local Professionals

Las Cruces Metal Roofing · Fast response in Hatch and the Las Cruces area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+272Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Hatch is a chile farming town where the roofs take a beating. Between the scorching sun, the July monsoon hail, and the dust storms that roll through the Rio Grande valley, the barns, sheds, and homes here need roofing that can handle the Chihuahuan Desert without flinching.

Las Cruces Metal Roofing is based just down the road, and we know the Hatch area well. From the pecan orchards along the river to the equipment sheds out on the farms, we have seen what the sun and storms do to a roof. That is why homeowners and property managers in 87937 call us for metal roofing that lasts.

Metal Roofing in Hatch (87937)

Hatch sits in the Mesilla Valley, surrounded by chile fields and pecan orchards. The land is flat and irrigated, which means drainage and ground conditions are different from the rocky slopes up in Las Cruces. Farm buildings here often have wide, low-slope roofs that need to shed water fast during monsoon season. The intense UV and summer heat can bake asphalt shingles until they crack and curl, while metal roofing reflects that heat and holds up to the sun. We also see a lot of corrugated and ribbed panel roofs on barns and sheds that need re-fastening after windstorms or replacement after hail. Our team is experienced with agricultural buildings and understands the tight access around orchards and equipment.

We have been serving Hatch and the surrounding Las Cruces area for years, and we know the local building department and what it takes to get a roof done right here.

Our services in Hatch

How a Job Works in Hatch

Step 1: You call us at (575) 339-1859 or fill out our contact form, and we schedule a free on-site assessment. We will look at your roof, take measurements, and talk through your options. Whether it is a small repair on a shed or a full replacement on your home, we give you a clear written estimate.

Step 2: Once you approve, we pull the necessary permits. In Hatch, that means checking with the local building department (rules can vary, so we verify everything). We also coordinate with any HOA or historic district requirements if they apply. Our crew arrives on time, protects your landscaping, and works efficiently. For farm buildings, we plan around your operations so we do not get in the way of harvest or equipment movement.

Step 3: When the work is done, we clean up thoroughly. We haul away all old materials and debris, and we do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and your roof is ready for the next monsoon.

Metal roofing in Hatch is priced by the square foot, and the final cost depends on the size of your roof, the material you choose, and the condition of the existing structure. For a typical home, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. For farm buildings, corrugated and ribbed panel roofing starts at $5.50 per square foot. We also offer free estimates for commercial and agricultural metal roofing. Give us a call at (575) 339-1859 to get a precise quote for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Hatch and nearby areas.

My barn roof in Hatch is showing rust and loose screws. Can you repair it or do I need a full replacement?
We see a lot of that on farm buildings around Hatch. Often, we can replace the screws and re-fasten the panels, which starts at $750. If the rust is widespread or the panels are damaged, a replacement with corrugated or ribbed panel roofing might be more cost-effective. We offer free inspections to assess the condition and give you honest advice.
A monsoon storm just blew through Hatch and lifted some panels on my roof. How quickly can you respond?
We prioritize storm damage calls in the Hatch area. Call us at (575) 339-1859, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the roof to prevent further damage and then provide a repair estimate.
What does a metal roof cost for a typical home in Hatch?
For a standard home, metal roof installation starts at $8 per square foot, but the exact price depends on roof size, pitch, and material. Standing seam is around $10 per square foot. We provide free estimates so you can get a precise number for your property.
Do I need a permit to replace my roof in Hatch?
Yes, roofing permits are commonly required for replacements and re-roofs in Hatch. The rules and fees are set by the local building department, so we recommend checking with the City of Hatch website or calling them directly. We handle the permit process for you as part of our service.
My neighbor and I share a property line, and I want to make sure my new roof does not cause drainage issues. What should I do?
It is smart to be proactive. We can review your property lines and drainage plan to ensure your new roof directs water away from the neighbor's property. If you are in an HOA, we can also help you get approval for the roof style and color before installation.
Are you fully insured for roofing work in Hatch?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
What kind of maintenance does a metal roof need in Hatch's climate?
In Hatch, metal roofs should be inspected annually for loose fasteners, debris buildup, and any signs of rust. We recommend checking after monsoon season and before the windy spring. A simple coating every few years can extend the life of the finish. We offer maintenance plans and inspections.
Why choose us?

Trusted professionals in Las Cruces

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Las Cruces

All your work handled by qualified professionals in Las Cruces

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

272+ Verified Client Reviews in Las Cruces

⭐⭐⭐⭐⭐ 4.9/5 · 272 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Las Cruces · Response within 24h · No commitment · ☎ (575) 339-1859

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Las Cruces ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm